The method of making the bronze ding is similar to that of the bronze censer. Here are the steps to make a bronze ding:
Any bronze sculpture should be made of clay when it is made. This is a prototype that cannot be obtained. Then , the mold of the copper carving is made. The material selected for the mold is the resin prototype, the resin body is trimmed, and the embryo body is Grinding and surface treatment, and making a silicone mold, casting, shaping, the entire copper carving crafts.
The maintenance method of the copper pedestal is as follows
The copper pedestal is made of copper material. It is often placed in temples or religions. It will be smoked. Therefore, you should use a soft cloth to wipe off the dust on the surface. It is forbidden to touch the copper ding. There is sweat on the hands, with acidic and alkaline substances; copper lithographs can not be in contact with oil, there will be chemical reactions; when moving copper tripods, you should wear gloves, gently move, avoid too much Wear copper and bronze crafts. These are the maintenance items that should be paid attention to at ordinary times. I am very happy to share them with you.
Want to know more about copper sculptures, please visit http://tongdiao.99114.com/
Super Soft Print Fabric,Printing Super Soft Fabric,Print Fleece Fabric,Printed Fleece Fabric
Jiangyin Xiangxu Textile Co., Ltd. , https://www.nbfabricxiangxu.com