[China Glass Net] It’s raining again, the endless rains make the car owners complain, the rain brush is brushing, it’s not clean rain, the windows are always blurred, driving a car can be described as timid.
Its practical wiper brush is not clean, not necessarily the aging of the wiper, but the oil film on your window. The oil film mainly comes from the oil mist emitted by the automobile. It is gradually adsorbed on the windshield when it is driving normally. After a long time of high temperature oxidation, it is difficult to remove. Due to the mutual exclusion between oil and water, it is on the glass. It is easy to form irregular water and matte surfaces. In this case, you should purchase a special cleaning agent with a strong cleaning power to wipe the glass.
So, what if the problem with the wiper strip itself causes the windshield brush to be dirty?
If the original wiper strip is properly maintained, its life can reach 5 years. How to maintain it? More attention is needed to remove the fine sand particles on the wiper strip in time. Scraping with these fine sands is equivalent to sanding the wiper strips with a grinding wheel. After a long time, the finish will drop, and the strip of the donkey will definitely not clean the rain. Therefore, every time you wash your car, you must use your own hands to clean the tiny sand particles on the wiper strip. In addition, parking in the summer, try not to expose to the sun, because rubber products are more afraid of direct ultraviolet rays, easy to age and hard.
If the wiper is found to be unclean, most of them are caused by the roughening of the rubber strip of the wiper. In fact, the rubber strip is not aged and hard. Just think of ways to make the rough rubber strips smooth and polished. Here's how to get the wiper back as new:
1. It is best to remove the two wipers.
2. Prepare a piece of water sandpaper.
Water sandpaper for 2000 purposes is available in paint shops. Tear the water sandpaper into small pieces, and use a small piece each time.
3. Soak the wiper and water sandpaper with clean water.
4. Polish the rubber strip of the wiper with water sandpaper.
Note that not only should the two sides of the strip be sanded, but the front side of the strip should also be properly ground. The time does not need to be very long, it will take about 5 minutes.
Let's talk later, what you need to pay attention to in daily maintenance of the wiper:
1. Do not replace glass water with tap water;
2. Be sure to use the wiper when there is water on the surface of the glass to avoid scratching the strip;
3. Lift the wiper arm when the vehicle is not parked for a long time or when it is parked in hot or cold weather.
Printed T-shirts is our new fashions,this fabric is very soft and the main fabric is 95%cotton 5% spandex.daisy is printed in the left bust ,if u wear it,it will looks youth and full of sunshine,we have various kinds of colors for ur choice,by the way,if u have ur own design or other idea,u can also send us,we will according to ur requirements to do well.
Printed Shirts,Printed T-Shirts,Personalised T Shirts,Plain T Shirts For Printing
Shaoxing PinSheng Garment co,ltd , https://www.psfsshirt.com